Skip to content

Brian Barrett, Foundry Foreman

May 4, 2023
by the gentle author

CLICK HERE TO BOOK FOR MY SPITALFIELDS WALKS FROM 13TH MAY

CLICK HERE TO BOOK FOR  MY CITY OF LONDON WALKS FROM 4TH JUNE

.
.

Brian Barrett was packing up alone in the foundry on Friday, when I dropped by to pay a visit at J.Hoyle & Son – although he seemed in no hurry to leave. “Looking forward to the weekend?” I queried, to permit him an exit line if he chose to take it. “I hate Fridays,” was Brian’s unexpectedly ambiguous response, “one day nearer to Monday, isn’t it?”

So there we were together, standing in the stillness of a shaft of sunlight upon the sandy floor of the old foundry, enjoying this brief moment of peace when the work was done and contemplating the achievement of the past week, manifest in the castings of iron stair rods laid out in front of us. Already my suspicion was that Brian was a little unconvincing in his reluctance to anticipate next week but as I did not wish cloud his satisfaction, I simply asked if he was finished for this week. “I shall come in on Saturday for a few hours,” he confirmed with a placid smile through his straggly beard, just to reassure me that his job was no ordeal.

In this venerable brick building beside the canal glimmers the spirit of the Industrial Revolution and even earlier – because iron casting is one of the oldest technologies known to man – and at J.Hoyle & Son the essentials have not altered since they set up in 1880, as one of the many small foundries that operated in the East End at that time. Ironwork cast here at J.Hoyle & Son (the Beehive Foundry) can be seen upon the National Portrait Gallery, the British Museum, the Houses of Parliament, 10 Downing Street, the Bank of England, the Natural History Museum, and SmithfieldMarket – as well as the lamp posts along the Chelsea Embankment.

On every occasion I have passed, I have caught a fleeting glimpse from the street into the hazy dim interior of this foundry, a place of dusty old equipment and raw creation, containing both the dark furnace of William Blake’s Jerusalem and the chiaroscuro familiar from the paintings of Joseph Wright of Derby. My father was apprenticed at a foundry at the age of twelve, yet I had never been inside a foundry and all this time I have carried a burning curiosity to get into one of these places. So it was a vivid and emotional moment for me when I stepped through the threshold in the twentieth century facade of J.Hoyle & Son into the vast darkness of the nineteenth century foundry beyond.

Everything was encrusted with black sand, settled like ash, as if I was in the proximity of a volcano, and there was an intense metallic smell – which I learnt was formaldehyde used to set the moulds – that filled the lungs. And after a lifetime of expectation, it was a privilege to be welcomed by Brian, the limber and sinewy custodian in his proud lair, to this environment that is so alien to the city street outside yet strangely reassuring to me.

Brian was born nearby on King Edward’s Rd, Hackney, in 1944, and he now lives in Well St just over the road from the foundry. “I’ve been at Hoyle & Son for sixteen years.” he revealed,“I started off as a labourer in another foundry at seventeen and progressed from there. I just fell into it – and I never considered doing anything else.” And then he qualified this expectation, in case it should appear too casual, adding, “You’ve got to be good though, you’ve either got the fingers for it or you haven’t.”

Today, Alan Hoyle runs the business founded by his grandfather John Hoyle and now Brian his foreman is training Ben Hoyle, the fourth generation, as a general apprentice in all areas of foundry practice. Hoyle & Son own an enormous pattern book that allows them to match almost any historic railing or piece of ironwork to replace it, receiving business from restoration projects nationwide and giving Brian with a continuous stream of intriguing project, both casting and repairs, to fill his days.

As the foreman with a team of seven, Brian runs holds the responsibility of running the furnace, taking the pig iron that you see piled up by the door and heating it to thirteen hundred degrees ready for pouring. “You make a lot of friends if you’re working the furnace in the Winter.” he quipped sagely, referring to the ever-open foundry doors that bring in the Spring breezes now but render the workplace less sympathetic in January. “Estuary Iron” is often used these days which contains graphite and is tougher and less brittle than conventional cast iron. Another modern intervention is the vast computerised sand pump, towering over the foundry, that can pump eight tonnes of sand an hour, mixed with resin to make the moulds for casting. “We used to work with damp black sand, but this combination allows us to get better detail,” explained Brian. Once the casts are cracked out of the moulds, they are put into the shop blaster – a bizarre variant upon a tumble dryer, that fires steel shot at the rotating pieces of iron to remove scraps and clean up the shape.

I was inspired to see this foundry work continuing in time-honoured fashion and know that no piece of railing or fence need ever be irreparable, thanks to the talents of Brian and the team at J.Hoyle & Son. “No-one likes getting their hands dirty, do they?” asked Brian rhetorically, displaying his grimy paws to me when I offered my hand to shake his. Yet although for generations white collar jobs have been widely perceived as superior to blue collar employment, and my father spoke of his apprenticeship in vaguely apologetic terms, it is obvious that there can be dignity and fulfilment in manual work – such as here at this foundry – requiring real skill and accomplishment.

Brian’s hands looked like my father’s hands, lined with ingrained dirt, which I remember from my childhood and that magically renewed after his retirement, as if he had worked at a desk his whole life. I am proud and a little envious that my father undertook an apprenticeship in a foundry, and I hope future generations will see the magic of these essential industries – appreciating the primal delight in getting your hands dirty.

Brian Barrett and I shook hands on it.

 

Brian’s furnace with the crucible for molten iron at the ready.

The computerised sand pump mixes beach sand with hardeners and resin to make moulds.

The shop blaster where new castings are tumbled amongst steel shot.

Options for spindles.

A fraction of the patterns in stock.

Pages of the pattern book adorn the office walls.

Brian opens a mould to take a look.

You may like to read about

The Roundels of Spitalfields cast at James Hoyle & Son

The Manhole Covers of Spitalfields

4 Responses leave one →
  1. Jill Wilson permalink
    May 4, 2023

    Absolutely agree that there is great dignity and satisfaction in doing jobs which make the hands dirty… Mine are never really clear of paint (currently various shades of blue!) or glue or plaster but I wouldn’t have it any other way.

  2. Rick Armiger permalink
    May 4, 2023

    a magnificent post in every respect

  3. May 4, 2023

    This blog brought back memories. My husband worked in a foundry – a huge British Rail foundry, part of a huge set of engineering workshops – as a young man in the late 70s and early 8Os. He often worked one of the cranes above the fiery furnaces. It was hard, dangerous work and at least one person was killed while my husband worked there. The fires burned night and day and the men worked regular night and day shifts. When it became cheaper to get rails and the fitments that secured the sleepers to the rails from other suppliers, the factory closed in the mid 80s. The local economy was badly shaken as Horwich Loco Works was a valuable source of employment for men from Bolton, Horwich, Westhoughton and Wigan. The operation was on a much greater and less artisan scale than J Hoyles and Sons. It is great to read that this East End Foundry is still going strong.

    When I first saw the photograph of Brian, I thought it was a painting. The composition and the colours have the quality of a painting and some of the shots of the inside of the factory like wise.

  4. Annie S permalink
    May 4, 2023

    Thanks, that’s really interesting!
    I have passed by that place many times to start a walk along the canal but knew nothing of the history and the work that is done there.

Leave a Reply

Note: Comments may be edited. Your email address will never be published.

Subscribe to this comment feed via RSS